Dell PowerEdge VRTX - Manual (Page 805)

Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8537
Message Unable to update the LKVM firmware, because the IP address provided is invalid.
ErrorCode=0x
arg1 .
Arguments
• arg1 = error no
Detailed
Description The LKVM firmware update operation was not successful, because the IP address of the active
CMC that is provided to the LKVM is invalid.
Recommended
Response Action Make sure the CMC IP address entered is valid, and then retry the Update operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8538
Message Unable to update the iKVM firmware. Reason = 0x arg1 .
Arguments
• arg1 = error no
Detailed
Description The iKVM firmware update operation was not successful.
Recommended
Response Action Retry the Update operation. If the issue persists, reinsert the iKVM and retry the operation.
805