Dell PowerEdge VRTX - Manual (Page 620)

Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC040
Message Missing parameters arg1 .
Arguments
• arg1 = parameters
Detailed
Description One or more required parameters needed for the method invoked in the operation are missing.
Recommended
Response Action Verify that all required parameters are provided. Refer to the Lifecycle Controller-Remote
Services documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC041
Message The set operation on the event filters failed.
Detailed
Description The event filters set operation did not complete successfully due to invalid input parameters.
Recommended
Response Action Verify the specified input parameters and retry the operation. Refer to the Lifecycle Controller-
Remote Services documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
620