Dell PowerEdge VRTX - Manual (Page 569)

Recommended
Response Action Turn on the server identified in the message. If the issue persists, contact your service
provider.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8544
Message Chassis Management Controller turned off the Server arg1 because of insufficient power at
inventory.
Arguments
• arg1 = slot number
Detailed
Description Insufficient power is available for the server identified in the message to function. The server
will be turned off until there is sufficient power available.
Recommended
Response Action Make sure there is enough power supply to distribute power. Using the CMC Web UI, go to
Chassis Overview > Power > Power Budget Status. In the Total Input Power Available For
Allocation field view the available power. To add more power, insert more PSUs or remove
unused components from the chassis.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8545
Message Chassis Management Controller turned off the server arg1 because of incorrect power data
retrieved from iDRAC at inventory.
569