Dell PowerEdge VRTX - Manual (Page 247)

HWC8505
Message Control panel firmware update arg1 complete
Arguments
• arg1 = version
Detailed
Description The control panel firmware has been updated
Recommended
Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID 2331
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#LC Log;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
HWC8506
Message Unable to update control panel firmware
Detailed
Description Control panel firmware update operation was not successful. The firmware Image file could
not be transferred.
Recommended
Response Action Remove and reapply input power. If problem persists, contact technical support. Refer to the
product documentation to choose a convenient contact method.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID 2329
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#LC Log;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
247