Dell PowerEdge VRTX - Manual (Page 531)

Recommended
Response Action 1) Remove and re-install the power supply. 2) Check cables and subsystem components in the
system for damage. 3) If the issue persists, contact technical support. Refer to the product
documentation to choose a convenient contact method.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 2185
LCD Message An over current fault detected on PSU . Check PSU.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PSU0037
Message Fan failure detected on power supply arg1 .
Arguments
• arg1 = number
Detailed
Description None
Recommended
Response Action Check for fan blockage. If not replace the power supply.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 2185
LCD Message Fan failure detected on PSU . Check PSU.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PSU0076
Message A power supply wattage mismatch is detected; power supply arg1 is rated for arg2 watts.
Arguments
• arg1 = number
• arg2 = value
531