Dell PowerEdge VRTX - Manual (Page 771)

SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8526
Message Unable to delete Chassis Group member arg1 ( arg2 )
Arguments
• arg1 = member id
• arg2 = DNS or IP address of member
Detailed
Description Unable to delete Chassis Group member identified in the message. Another user may have
deleted the member before the operation or the group may have been disbanded.
Recommended
Response Action Make sure the member identified in the message exists as a member of the Chassis Group. Use
the CMC web interface to select the lead chassis, select the setup tab, and then select the
group administration sub tab and check if the member exists. If the member exists, restart the
group leader and retry the operation.
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8527
Message Chassis Management Controller is unable to update the iDRAC user name to "root".
Detailed
Description Chassis Management Controller unable to update the IDRAC root user username as root. This
can happen if the communction to the iDRAC from CMC is non-functional or if the username
supplied is not valid.
771