Dell PowerEdge VRTX - Manual (Page 789)

42
SWU Event Messages
SWU8500
Message The schedule to arg1 Lifecycle Controller on server arg2 was not successful.
Arguments
• arg1 = update/reinstall/rollback
• arg2 = slot number
Detailed
Description This message is displayed when: 1. A reboot job is unable to provide a valid reboot ID. 2. The
WSMAN command to set up a job queue on Lifecycle Controller was not successful.
Recommended
Response Action Retry the operation. If the error persists, contact your service provider.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8501
Message The schedule to reinstall/rollback Lifecycle Controller on server arg1 was not successful.
Arguments
• arg1 = slot number
Detailed
Description This message is displayed when: 1. A reboot job is unable to provide a valid reboot ID. 2. The
WSMAN command to set up a job queue on Lifecycle Controller was not successful.
Recommended
Response Action Retry the operation. If the error persists, contact your service provider.
Category Updates
SubCategory SWU = Software Change
789