Swc8500, Swc8501 – Dell PowerEdge VRTX User Manual
Page 757
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
SWC8500
Message
Unable to generate Profile with [
arg1
] settings.
Arguments
•
arg1 =
number of entries
Detailed
Description
Unable to communicate with iDRAC.
Recommended
Response Action
Check if iDRAC is ready and system is running properly. Utilize the RACADM command by
running "racadm getversion" to list all the servers and make sure the iDRAC version is
displayed. If the iDRAC is listed as Not Ready then wait until it becomes ready. A Virtual Reseat
may be required.
Category
Audit
SubCategory
SWC = Software Config
Severity
Severity 1 (Critical)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
SWC8501
Message
Unable to generate Profile.
Detailed
Description
Unable to communicate with iDRAC.
Recommended
Response Action
Check if iDRAC is ready and system is running properly. Utilize the RACADM command by
running "racadm getversion" to list all the servers and make sure the iDRAC version is
displayed. If the iDRAC is listed as Not Ready then wait until it becomes ready. A Virtual Reseat
may be required.
Category
Audit
757