Dell PowerEdge VRTX - Manual (Page 847)

45
USR Event Messages
USR8500
Message Excessive login failures from arg1 ; blocked for arg2 seconds.
Arguments
• arg1 = IP address
• arg2 = number
Detailed
Description Multiple login attempts were unsuccessful from the identified IP address. After detecting this
error condition, this IP address will be blocked from login for the duration specified in the
message.
Recommended
Response Action Make sure the username and password credentials used are correct, wait for the duration
specified in the message and then retry the login.
Category Audit
SubCategory USR = User Tracking
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
USR8501
Message Successfully closed Session process: pid= arg1 sid= arg2
Arguments
• arg1 = process ID
• arg2 = session ID
Detailed
Description The operation to close a user session using the process ID identified in the message was
successful.
Recommended
Response Action No response action is required.
Category Audit
847