Dell PowerEdge VRTX - Manual (Page 295)

IOV008
Message Chassis manager was unable to put PCIe subsystem into factory mode
Detailed
Description Chassis manager was unable to put PCIe subsystem into factory mode
Recommended
Response Action Retry command
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV009
Message Chassis manager unable to reset to factory default or pre-factory defaults.
Detailed
Description The Chassis manager only executes this function when the chassis is powered down.
Recommended
Response Action Power down chassis and retry command
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV101
Message PCIE device arg1 inserted in arg2arg3 .
295