Dell PowerEdge VRTX - Manual (Page 810)

LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8548
Message Unable to update the Standby CMC firmware. The Image was not accessible.
Detailed
Description The firmware update operation of Standby CMC was not successful. The firmware image could
not be accessed.
Recommended
Response Action Make sure that the CMC firmware image file is available at the location specified in the
operation, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8549
Message Unable to update the firmware of Standby CMC and Active CMC. The checksum process was
not successful.
Detailed
Description The firmware update process of Active CMC and Standby CMC was not successful, because of
a firmware image checksum error.
Recommended
Response Action Reacquire the Image file from the source location, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
810