Dell PowerEdge VRTX - Manual (Page 632)

Category Audit
SubCategory RDU = Redundancy
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
RDU8516
Message CMC arg1 : failover initiated by RACADM interface.
Arguments
• arg1 = slot number
Detailed
Description A failover has been requested from the RACADM command line interface.
Recommended
Response Action No response action is required.
Category Audit
SubCategory RDU = Redundancy
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
RDU8517
Message CMC arg1 : no action allowed whiile firmware update is in progress
Arguments
• arg1 = slot number
Detailed
Description No failover or other action can occur while a CMC firmware update is in progress.
632