Allied Telesis AT-S99 - Manual (Page 99)

AT-S73 and AT-S99 Management Software User’s Guide
99
Figure 30. Event Log
The columns in the event log are described in Table 8.
Converteon
Event Log
Total Events: 8. Displaying: 1 to 4
Date Time ModuleName Message
------------------------------------------------------------------
12/10/07 11:32:02: REPORT: Region21 Line Card 2 Port 1 Online
12/10/07 11:32:05: REPORT: Region21 Line Card 2 Port 2 Online
12/10/07 11:32:10: REPORT: Region22 Line Card 3 Port 1 Online
12/10/07 11:32:15: REPORT: Region22 Line Card 3 Port 2 Online
N - Next Page, P - Previous Page, F - First Page, L - Last Page, R - Return
Table 8. Event Log Format
Column Definition
Date This column displays the dates of the events.
Time This column displays the times of the events.
(Classification) This unlabeled column displays the classifications of
the events. An event’s classification can be REPORT
or CLEAR. A report signals an event’s occurrence
while a clear signifies the resolution of a prior event.
For example, if a chassis’ operating temperature
were to exceed the temperature threshold, the
management module would mark the event’s
occurrence by entering a “High Temperature
Threshold” event in the log with a classification of
report. After the temperature returned below the
threshold, the management card would log the same
event message with a clear classification.
All of the messages can be reports, but only a few
can also be clear signals.
ModuleName This column displays the names of the line cards that
generated the event messages.
Message This column displays the event messages. The
messages are described in Table 9.