Allied Telesis AT-S99 - Manual (Page 85)

AT-S73 and AT-S99 Management Software User’s Guide
85
Assigning a Name
By assigning a name to the management card, you make the card and the
chassis easier to identify. The name is displayed at the top of the menus of
the management software during your local management sessions and
remote Telnet sessions. (The web browser windows do not display the
system name.)
Menus
You can assign a name to the management card from the System
Configuration Menu or the Omega Options Menu. This procedure uses the
System Configuration Menu. To assign a name to the management card
from the menus:
1. From the Main Menu, select Configuration to display the
Configuration Menu shown in Figure 20 on page 80.
2. From the Configuration Menu, select System Configuration to display
the menu in Figure 21 on page 80.
3. From the System Configuration Menu, select System Name and enter
a new name for the card of up to 40 characters. Spaces and special
characters are permitted. To delete the current name without entering
a new name, press the space bar once.
4. To save your changes in the master configuration file, return to the
Configuration Menu and select Save System and All Line Card
Configurations.
Web Browser
To assign a name to the management card from the web browser
windows:
1. Select Configuration from the menu bar.
2. If the System tab is not selected, select it. An example of the System
tab is shown in Figure 23 on page 83.
3. Click Edit in the System Information section of the tab.
4. In the pop-up window, select the System Name field and enter a new
name for the card of up to 40 characters. Spaces and special
characters are permitted. To delete the current name without entering
a new name, press the space bar once.
5. Click Update.
6. To save your changes in the master configuration file, select the Files
tab in the Configuration window and click Save System
Configuration and All Cards Configurations and Apply.