Allied Telesis AT-S99 - Manual (Page 102)

Chapter 4: Configuring the AT-CV5M02 Management Card
102
4. To clear all the messages from the log, select Clear Event Log from
the Event Log Menu.
Fan Tray A/B has
been Removed AT-CV5000 Report The AT-CVFAN Fan Module was removed
from the chassis.
Fan Tray Module A/B
Fan n Failed AT-CV1200
AT-CV1203
AT-CV5000 Report A cooling fan stopped.
Clear A cooling fan resumed operations.
Line Card n Missing AT-CV1200
AT-CV1203
AT-CV5000 Report The line card in slot n was removed from
the chassis.
Clear The line card removed from slot n was
reinstalled in the slot.
Line Card m Port n
Offline AT-CV1200
AT-CV1203
AT-CV5000 Report Port n on the line card in slot m lost its link
to a network device.
Line Card m Port n
Online AT-CV1200
AT-CV1203
AT-CV5000 Report Port n on the line card in slot m
established a valid link with a network
device.
Line Card n Reboot AT-CV1200
AT-CV1203
AT-CV5000 Report The line card in slot n was rebooted from
using the AT-CV5M02 Management Card.
Power Module A/B
has been Installed AT-CV5000 Report The AT-PWR14 or AT-PWR15 Power
Supply Module was installed in the
AT-CV5000 Chassis.
Power Module A/B
has been Removed AT-CV5000 Report The AT-PWR14 or AT-PWR15 Power
Supply Module was removed from the
AT-CV5000 Chassis.
Table 9. Event Log Messages
Message Chassis
Classi-
fication
Definition