Allied Telesis AT-S99 - Manual (Page 114)

Chapter 4: Configuring the AT-CV5M02 Management Card
114
4. Enter Y for Yes to restore the parameters on the management card to
their default values or N for No to cancel the procedure.
If you respond with yes, the management card resets and your
management session ends.
5. To resume managing the unit, wait one minute for the card to initialize
its management software and then start a local management session
on the card.
6. If the chassis has two management cards, reinstall the standby card.
Web Browser
To restore the default settings on the management card from the web
browser windows:
1. If the chassis has two AT-CV5M02 Management Cards, remove the
standby card.
2. Click Configuration from the menus bar.
3. Click the Files tab, shown in Figure 14 on page 65.
4. Click the radio button for Return Configuration in Management Card
to Default and click Apply.
The management card resets and your remote web browser
management session ends.
5. To resume managing the unit, wait one minute for the card to initialize
its management software and then start a local management session
on the card.
6. If the chassis has two management cards, reinstall the standby card.