beautypg.com

Table 8. omega options menu – Allied Telesis AT-S99 User Manual

Page 91

background image

AT-S73 and AT-S99 Management Software User’s Guide

91

4. Configure the parameters as needed. The options are described in

Table 7.

Table 7. Omega Options Menu

Parameter

Description

System Name

This parameter assigns a name to the management card.
The name can have up to 40 characters. Spaces and special
characters are permitted. To delete an existing name without
entering a new name, press the space bar once.

Manager Password
Operator Password

These parameters are used to set the manager and operator
passwords. Passwords can have 0 to 16 alphanumeric
characters of the letters A to Z in uppercase and lowercase,
as well as the numbers 1 to 9. Passwords are case-sensitive
and should not contain special characters, such as spaces,
asterisks (*), or exclamation points (!). The default
passwords are “friend” for the manager account and
“operator” for the operator account.

The password is displayed as a series of asterisks. To delete
the current password without assigning a new password,
enter a space in the password field.

Timeout

This parameter is used to set the amount of time in minutes
the management software waits before it automatically ends
an inactive local or remote management session. The
management software automatically logs off a management
session if there is no management activity for the duration of
the timer. This security feature can prevent unauthorized
individuals from using your management station to alter the
configuration settings of the media converter chassis should
you step away from your system during a management
session.

The console timer has a range of 1 to 60 minutes. The
default value is 10 minutes.

Local Omega Enabled
Disable Local Omega

These parameters are used to enable or disable the Console
port on the management card. When the Console port is
disabled, local management of the chassis through the RS-
232 Console port is prohibited. The default setting for the
Console port is enabled.

If you disable local management during a local management
session, your current session is not interrupted. However,
the card will not allow you to establish any new local
management sessions.

This manual is related to the following products: