Allied Telesis AT-S99 - Manual (Page 149)

AT-S73 and AT-S99 Management Software User’s Guide
149
Assigning Names to AT-CM Line Cards
Menus
To assign names to the AT-CM Line Cards from the menus:
1. From the Main Menu, select Module Status and Configuration to
display the Module Status and Configuration menu shown in Figure 48
on page 128.
2. From the Module Status and Configuration menu, select the line card
you want to name. You can configure only one line card at a time. The
Module Configuration Menu in Figure 53 on page 139 is displayed.
3. From the Module Configuration Menu, select Module Name and enter
the new name for the card. The name can be up to eight alphanumeric
characters. Spaces and special characters are not allowed.
4. To save your changes in the master configuration file, select Line
Card Configuration and Save Line Card Configuration. Or, return to
the Main Menu and select Configuration and Save System and All
Line Card Configurations.
Web Browser
To assign names to the AT-CM Line Cards from the web browser
windows:
1. Select Module Status & Configuration from the menu bar.
2. In the Chassis View, click a port on the line card you want to assign a
name. Alternatively, select the Menu View tab and click the name of
the line card. You can configure only one line card at a time.
3. Click the Setting tab, shown in Figure 58.
4. Click Edit in the Module Name section of the window.
5. In the Module Name pop-up window, enter the new name for the card.
The name can be up to eight alphanumeric characters. Spaces and
special characters are not allowed.
6. Click Update.
7. To save your changes in the master configuration file, select
Configuration from the menu bar. From the Configuration window,
click the Files tab, Save System Configuration and All Cards
Configurations, and Apply.