Snmpv3 operator configuration – Allied Telesis AT-S99 User Manual
Page 293
AT-S73 and AT-S99 Management Software User’s Guide
293
Configure SNMPv3 Target Address Table
Target Address Name: host408
Ip Address: 198.35.11.1
UDP Port#: 162
Timeout: 1500
Retries: 3
Tag List: sysadminTag
Target Parameters: SNMPmgrPC
Storage Type: NonVolatile
Configure SNMPv3 Target Parameters Table
Target Parameters Name: SNMPmanagerPC
User (Security) Name: systemadmin24
Security Model: v3
Security Level: P-AuthPriv
Storage Type: NonVolatile
SNMPv3
Operator
Configuration
This section provides a sample configuration for an Operator with a User
Name of atiengr77. Since this user will only send messages to a group and
not an SNMP host, you do not need to configure message notification for
this user.
Configure SNMPv3 User Table Menu
User Name: atiengr77
Authentication Protocol: MD5
Privacy Protocol: None
Storage Type: NonVolatile
Configure SNMPv3 View Table Menu
View Name: internet
View Subtree OID: 1.3.6.1 (or internet)
Subtree Mask:
View Type: Included