Allied Telesis AT-S99 - Manual (Page 269)

AT-S73 and AT-S99 Management Software User’s Guide
269
Security Model [1-v1, 2-v2c, 3-
v3] The Security Model for this Security Name or User Name. The
possible values are
1-v1
This value associates the Security Name or User Name with
the SNMPv1 protocol.
2-v2c
This value associates the Security Name or User Name with
the SNMPv2c protocol.
3-v3
This value associates the Security Name or User Name with
the SNMPv3 protocol. The SNMPv3 protocol allows you to
configure the group to authenticate SNMPv3 entities (users)
and to encrypt messages.
Security Level [A-AuthNoPriv,
P-AuthPriv, N-NoauthNoPriv] The possible values are:
Note
This value must match the security level of the
corresponding user name in the SNMPv3 User Table.
A-AuthNoPriv
This option provides authentication, but no privacy protocol.
The SNMP user is authenticated, but without encryption. You
can select this value if you configured the Security Model
parameter with the SNMPv3 protocol.
P-AuthPriv
This option provides authentication and the privacy protocol.
This security level encrypts messages using a privacy protocol
and authenticate SNMP entities. This level provides the
greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3
protocol.
N-NoauthNoPriv
This option provides no authentication and no privacy protocol.
This security level is appropriate if you do not want
authentication of SNMP entities or encryption. This security
level provides the least security.
Note
The only security level for SNMPv1 and SNMPv2c is N-
NoauthNoPriv.
Table 34. SNMPv3 Target Parameters Table Parameters
Parameter Description