Allied Telesis AT-S99 - Manual (Page 195)

AT-S73 and AT-S99 Management Software User’s Guide
195
Figure 84. UART Configuration Menu
5. From the UART Configuration Menu, select one of the following
options:
ˆ UART Local Console Mode - Select this setting to configure the T1/
E1 ports from the Console port on the line card. This setting is
appropriate for AT-CM70S Line Cards in chassis that do not have a
management card. This is the default setting.
ˆ UART Back Plane Mode - Select this setting to configure the T1/E1
ports using a management card. Do not select this setting if the
card will be deployed at a remote site in a chassis that does not
have a management card.
6. At the confirmation prompt, type Y to implement your change or type N
to cancel it.
7. To save your changes in the master configuration file, return to the
Main Menu and select Configuration and Save System and All Line
Card Configurations.
UART Configuration Menu
Module 15, Port C
> UART Local Console Mode
UART Back Plane Mode
Return to Port Configuration Menu ...