Allied Telesis AT-S99 - Manual (Page 97)

AT-S73 and AT-S99 Management Software User’s Guide
97
Web Browser To reset the management card from the web browser windows:
1. Select Module Status and Configuration from the menu bar.
2. From the Chassis View, click the 10/100Base-TX port on the
AT-CV5M02 Management Card. Alternatively, select the Menu View
and click the model name of the management card.
3. Click the General tab, shown in Figure 27.
Figure 27. General Tab
4. Click Reset Management Card and Restart System Software.
5. At the confirmation prompt, click OK to reset the management card or
Cancel to cancel the procedure.
6. To resume managing the chassis, wait one minute for the
management card to initialize its management software and then start
a new management session.