Allied Telesis AT-S99 - Manual (Page 67)

AT-S73 and AT-S99 Management Software User’s Guide
67
ˆ Save Line Card Configuration (menus) and Save Current
Configuration (web browser windows) - These commands make it
easier for you to save your changes after configuring the individual
local or remote AT-CM Line Cards. Rather than having to return to the
Main Menu or the Files tab after configuring a line card, you can save
your changes with these commands instead.
Note
If you’re confused by all of these save commands, then just stick
with the Save System and All Line Card Configuration command.
That command insures that the master configuration file in flash
memory on the management card has the current settings from all
the cards in the chassis.
There are two more save commands that are related to redundant
AT-CV5M02 Management Cards in the AT-CV5000 Chassis. These
commands are located in the Management Card Redundancy menu and
tab, shown in Figure 17 and Figure 18, respectively.
Figure 17. Management Card Redundancy Menu
Figure 18. Management Card Redundancy Tab
Management Card Redundancy Menu
Switch Over Management Cards
Copy Active Card Configuration to Standby Card
Save Current Configuration of Standby Card
Return to Administration Menu ...