Allied Telesis AT-S99 - Manual (Page 214)

Chapter 8: Configuring the Operations, Administration, and Maintenance Client
214
Displaying OAM Information for Local OAM Clients
The procedures in this section explain how to view OAM status
information on local OAM clients on the AT-CM Line Cards.
Note
For you to view OAM information, the AT-CM Line Cards have to be
set to the OAM visible mode.
Menus
To display status information for local OAM clients from the menus:
1. From the Main Menu, select Module Status and Configuration to
display the Remote Module Status and Configuration Menu. An
example of the menu is shown in Figure 48 on page 128.
2. Select the local line card whose OAM information you want to view.
This displays the Module Configuration Menu for the line card. An
example is shown in Figure 53 on page 139.
3. Select Port A to display the Port Management Menu shown in Figure
54 on page 140. OAM is only supported on port A of the line cards.
4. From the Port Management Menu, select OAM Configurations to
display the OAM Configuration Menu, An example of the menu is
shown in Figure 89 on page 204.
5. From the OAM Configuration Menu, select the Show Local OAM
Information window to display the Show Local OAM Information
Menu, shown in Figure 96 on page 215.