Allied Telesis AT-S99 User Manual
Page 156
Chapter 5: Configuring AT-CM and AT-CV Media Converter Line Cards
156
This tab displays the line card’s default settings.
5. To return the parameter settings on the line card to the default values,
click Return to Default Configuration.
The parameter settings on the line card are returned to their default
settings and the Menu View is displayed. A line card whose previous
operating mode was OAM visible resumes normal network operations
almost immediately. However, if the card’s previous operating mode
was not OAM visible, it has to initialize its management software, a
process that takes approximately one minute.
6. To save your changes in the master configuration file, wait for the line
card to finish initializing its management software. Then select
Configuration from the menu bar. From the Configuration window,
select the Files tab and click Save System Configuration and All
Cards Configurations and Apply.