Allied Telesis AT-S99 - Manual (Page 89)

AT-S73 and AT-S99 Management Software User’s Guide
89
Specifying the IP Addresses of SNMP Trap Receivers
The management card can send SNMP traps to up to four trap receivers
on your network. The traps alert you to significant events in the operations
of the Converteon chassis, like the removal of line cards, the failure of a
cooling fan, or the loss of a link on a port on a media converter line card.
The requirements for this feature are described in “Access to Your
Network” on page 28.
Menus
To specify the IP addresses of SNMP trap receivers from the menus:
1. From the Main Menu, select Configuration. This displays the
Configuration Menu shown in Figure 20 on page 80.
2. From the Configuration Menu, select System Configuration to display
the menu in Figure 21 on page 80.
3. Select IP Parameters to display the menu in Figure 22 on page 81.
4. In the Manager Address fields enter the IP addresses of the trap
receivers. To remove an IP address, enter 0.0.0.0.
5. To save your changes in the master configuration file, return to the
Configuration Menu and select Save System and All Line Card
Configurations.
Web Browser
To specify the IP addresses of SNMP trap receivers from the web browser
windows:
1. Select Configuration from the left menu bar.
2. Select the SNMPv1 & SNMPv2c tab. The SNMPv1 & SNMPv2c tab is
shown in Figure 24 on page 87.
3. To change the addresses of the SNMP trap receivers, click Edit to
display a pop-up window.
4. In the Manager Address fields enter the IP addresses of up to four
trap receivers.
5. Click Update.
6. To save your changes in the master configuration file, select the Files
tab in the Configuration window, click Save System Configuration
and All Cards Configurations and click Apply.