Allied Telesis AT-S99 - Manual (Page 255)

AT-S73 and AT-S99 Management Software User’s Guide
255
To manage the SNMPv3 View Table from the web browser windows:
ˆ :Click the Configuration button in the menu bar and then select the
SNMPv3 tab and the Access Table tab. The SNMPv3 Access Table
tab is shown in Figure 116.
Figure 116. SNMPv3 Access Table Tab
The parameters for SNMPv3 Access Table entries are defined in
Table 30.
Table 30. SNMPv3 Access Table Parameters
Parameter Description
Group Name A descriptive name for the group of up to 32 alphanumeric
characters. You are not required to enter a unique value here
because the SNMPv3 Access Table entry is indexed with the
Group Name, Security Model, and Security Level parameter
values. However, unique group names allow you to more easily
distinguish the difference groups.
There are four default values for this field:
ˆ defaultV1GroupReadOnly
ˆ defaultV1GroupReadWrite
ˆ defaultV2cGroupReadOnly
ˆ defaultV2cGroupReadWrite
These values are reserved for SNMPv1 and SNMPv2c
implementations.