Allied Telesis AT-S99 - Manual (Page 54)

Chapter 2: AT-CM and AT-CV Media Converter Line Cards
54
ˆ Refer to Table 4 for the required version numbers of the management
software.
ˆ If you install a management card in the remote AT-CV1203 Chassis so
that the chassis can send the 1st failure signal, you do not have to
configure the card, nor do you have to connect its 10/100Base-TX port
to the network. The card simply has to be present in the AT-CV1203
Chassis.
Table 3. Versions of the AT-CM Line Cards that Support Dying Gasp
Media Converter Line Card Hardware Version
AT-CM201 Version 2
AT-CM202 Version 2
AT-CM202/1 Version 2
AT-CM202/2 Version 2
AT-CM212A/1 Version 2
AT-CM212B/1 Version 2
AT-CM70S Version 2
AT-CM2KOS Version 3
Table 4. Versions of the Management Software that Support Dying Gasp
Management and Media
Converter Line Cards
Management Software Versions
AT-CV5M01 Management Card Version 2.0.2 or later of the
AT-S70 Management Software.
AT-CV5M02 Management Card Version 3.0.0 or later of the
AT-S99 Management Software
AT-CM Line Cards Version 2.0.2 or later of the
AT-S73 Line Card Management
Software.