Allied Telesis AT-S99 - Manual (Page 86)

Chapter 4: Configuring the AT-CV5M02 Management Card
86
Assigning Contact and Location Information
Menus
To enter the chassis’ location and the name of the network manager
responsible for managing the chassis:
1. From the Main Menu, select Configuration to display the
Configuration Menu shown in Figure 20 on page 80.
2. From the Configuration Menu, select System Configuration to
display the menu in Figure 21 on page 80.
3. Select IP Parameters to display the menu in Figure 22 on page 81.
4. To enter the location of the chassis, select Location. The location can
be up to 20 alphanumeric characters. Spaces and special characters
are permitted. To delete the current location without entering a new
location, press the space bar once.
5. To enter the name, phone number, or other information that identifies
the person responsible for managing the system, select Contact and
enter a value of up to 20 alphanumeric characters. Spaces and special
characters are permitted. To delete the current location without
entering a new location, press the space bar once.
6. To save your changes in the master configuration file, return to the
Configuration Menu and select Save System and All Line Card
Configurations.
Web Browser
To enter the contact and location information from the web browser
windows:
1. Select Configuration from the left menu bar.
2. Select the SNMPv1 & SNMPv2c tab. The SNMPv1 & SNMPv2c tab is
shown in Figure 24.