Allied Telesis AT-S99 - Manual (Page 249)

AT-S73 and AT-S99 Management Software User’s Guide
249
Figure 112. SNMPv3 User Table Tab
The parameters for SNMPv3 User Table entries are defined in Table 28.
Table 28. SNMPv3 User Table Parameters
Parameter Description
User (Security) Name A descriptive name for the user of up to 32 alphanumeric
characters.
Authentication Protocol The user’s authentication protocol. The possible values are:
M-MD5
This value represents the MD5 authentication protocol. Users
(SNMP entities) are authenticated with the MD5 authentication
protocol after a message is received. This algorithm generates
the message digest. The user is authenticated when the
authentication protocol checks the message digest. With the
MD5 selection, you can configure a Privacy Protocol.
S-SHA
This value represents the SHA authentication protocol. With
this selection, users are authenticated with the SHA
authentication protocol after a message is received. This
algorithm generates the message digest. The user is
authenticated when the authentication protocol checks the
message digest. With the SHA selection, you can configure a
Privacy Protocol.