Allied Telesis AT-S99 - Manual (Page 33)

AT-S73 and AT-S99 Management Software User’s Guide
33
(The incrementing number at the bottom of the screen is the ID number of
the parameter setting the active card is transmitting to the standby card.
All parameter settings have unique ID numbers. The number can be
ignored.)
After the management card has sent the entire master configuration file, it
displays “Succeeded.” To resume managing the chassis, press any key.
The status messages are somewhat different if you install a second
management card while viewing the Module Configuration and Status
menu or the Remote Module Configuration and Status menu; but their
meanings are the same.