Allied Telesis AT-S99 - Manual (Page 170)

Chapter 5: Configuring AT-CM and AT-CV Media Converter Line Cards
170
Displaying SFP Module Information
The procedures in this section are for viewing the manufacturer’s
specifications of the SFP modules in the AT-CM2KOS and AT-CM70S
Line Cards.
Menus
To view SFP information from the menus:
1. From the Main Menu, select Administration. The Administration
Menu is shown in Figure 28 on page 98.
2. From the Administration Menu, select Diagnostics to display the
Diagnostic Menu shown in Figure 45 on page 121.
3. From the Diagnostics Menu, select SFP Information. The following
prompt is displayed:
Enter LineCard Slot Number: ->
4. Enter the slot number of the AT-CM2KOS or AT-CM70S Line Card
with the SFP module. The following prompt is displayed:
Enter LineCard Port [A or B]: ->
5. Enter the port of the SFP module.
An example of the SFP Information window is shown in Figure 73 and
Figure 74.