Allied Telesis AT-S99 - Manual (Page 119)

AT-S73 and AT-S99 Management Software User’s Guide
119
Setting the Baud Rate of the Console Port
The RS-232 Console port on the front faceplate of the management card
is used to locally manage the card. This type of management session is
accomplished with a terminal or a computer with a terminal emulator
program.
The following procedures are used to set the baud rate of the Console
port. The baud rate is the only adjustable parameter on the port. Refer to
“Starting a Local Management Session” on page 58 for all of the Console
port settings.
Note
Changing the baud rate of the Console port during a local
management session ends your management session. To resume
managing the chassis, change the baud rate of your terminal or
terminal emulator program.
Menus
To set the baud rate of the Console port from the menus:
1. From the Main Menu, select Configuration. The Configuration Menu
is shown in Figure 20 on page 80.
2. From the Configuration Menu, select System Configuration to display
the menu in Figure 21 on page 80.
3. From the System Configuration Menu, select Terminal
Configuration. The Terminal Configuration Menu is shown in Figure
43.
Figure 43. Terminal Configuration Menu
Terminal Configuration Menu
Data Rate (baud rate) ...
Return to System Configuration Menu...