Allied Telesis AT-S99 - Manual (Page 273)

AT-S73 and AT-S99 Management Software User’s Guide
273
Configuring the TFTP Client
The procedure in this section explains how to configure the TFTP client.
This is the first step to using TFTP to download new versions of the
management software programs to the AT-CV5M02 Management Card or
the AT-CM Line Cards. This procedure has to be performed from the
menus. After you’ve configured the client, go to “Downloading New
Management Software Using TFTP” on page 275.
To configure the TFTP client:
1. From the Main Menu, select Configuration to display the
Configuration Menu shown in Figure 20 on page 80.
2. From the Configuration Menu, select System Configuration to display
the menu in Figure 21 on page 80.
3. From the System Configuration Menu, select TFTP Image Download
Configuration to display the menu in Figure 125.
Figure 125. TFTP Image Download Configuration
4. To enter or edit the IP address of the TFTP server on your network,
select the TFTP Server IP Address field and enter the IP address.
5. In the File Name fields, enter the filenames of the new image files of
the management software that you obtained from the Allied Telesis
web site and stored on your TFTP server. You do not have to enter
filenames for all of the fields. Rather, enter the filenames for just those
line cards you want to upgrade. The fields are defined here:
TFTP Image Download Configuration
TFTP Server IP Address:
Management Card:
AT-CM2x2 Image File Name:
AT-CM2Kx Image File Name:
AT-CM70x Image File Name:
Line Card Bootloader Image File Name:
Return to System Configuration Menu ...