Saving the parameter settings – Allied Telesis AT-S99 User Manual
Page 186
Chapter 6: Configuring AT-CM Line Cards with Remote Peer Management
186
Saving the
Parameter
Settings
Your changes to the parameter settings on remote AT-CM Line Cards are
automatically saved in the configuration files in flash memory and are
retained even if the remote chassis is powered off or the cards are
removed.
If desired, you can add the configuration settings of remote line cards to
the master configuration file in the management card in the local chassis
so that you can restore them to the remote cards, should that ever be
necessary. To update the master configuration file in flash memory on the
management card, click the Line Card Configuration tab, the Current
Configuration tab, and the Save Current Configuration button. If you
ever want to restore the setting to the line card or to a replacement card,
perform “Restoring the Last Saved Configuration” on page 185.