Allied Telesis AT-S99 - Manual (Page 201)

AT-S73 and AT-S99 Management Software User’s Guide
201
b. At the confirmation prompt, type Y and press Return to implement
the change or N and Return to cancel it.
5. To configure the settings of a T1/E1 port, enter the number of the
setting you want to change followed by the port (channel) number,
separated by a space. For example, to change the remote loopback
setting for port 2, you enter:
5 2
Table 24 on page 198 lists the possible settings.
6. When you finish managing the line card, simply disconnect the
management cable from the Console port. The port doesn’t have a
logout command.