Allied Telesis AT-S99 - Manual (Page 59)

AT-S73 and AT-S99 Management Software User’s Guide
59
4. When prompted, enter the username and password of the manager or
operator account on the management card. The manager account has
the username “manager” and the default password “friend.” The
operator account has the username “operator” and the default
password of “operator.” Usernames and passwords are case sensitive.
For further information, refer to “Manager and Operator Accounts” on
page 24. For instructions on how to change a password, refer to
“Configuring Management Security” on page 90.
After you log on, the Main Menu in Figure 10 is displayed on your
screen.
Figure 10. Main Menu
Note
The Management Card Redundancy option is only supported on the
AT-CV5M02 Management Card in the AT-CV5000 Chassis. This
feature is not supported on the AT-CV1200 or AT-CV1203 Chassis.
Note
Always remember to select Quit from the Main Menu when you
finish managing a chassis. If you close your terminal emulator
program without logging out, the management session remains
active and all further management is blocked until the console timer
times out.
Allied Telesis AT-CV5M02 Management Module Software
AT-CV5000 AC
Main Menu
Module Status and Configuration
Remote Module Status and Configuration
Administration
Image Download
Configuration
Management Card Redundancy
Quit