Allied Telesis AT-S99 - Manual (Page 125)

AT-S73 and AT-S99 Management Software User’s Guide
125
Pinging Network Devices
The procedure in this section is used to test for live connections between
the 10/100Base-TX port on the AT-CV5M02 Management Card and other
network devices. The management card transmits Internet Control
Message Protocol (ICMP) echo requests from the 10/100Base-TX port
and reports the results of the ping on the screen. You might perform this
procedure if the management card is experiencing a problem
communicating with another network device, such as a syslog server or a
TFTP server.
The system requirements for this test are described in “Access to Your
Network” on page 28
Menus
To ping a network device from the menus:
1. From the Main Menu, select Administration to display the menu in
Figure 28 on page 98.
2. Select Ping a Remote System. The following message is displayed:
Please enter Station IP Address to ping:
3. Enter the IP address of the network device you want the management
card to ping. The management card sends three ping echo requests
and displays the results on the screen.
4. To return to the Administration Menu, press any key.
Web Browser
This management function is not supported from the web browser
windows.