Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control - Manual (Page 419)

Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014 419
Appendix
B
Torque Requirements for Threaded Fasteners
Torque Requirements Unless otherwise specified the following values of torque are to be used in
maintaining the equipment.
Diameter Pitch Material Torque (N•m) Torque (lb•ft)
M2.5 0.45 Steel 0.43 0.32
M4 0.70 Steel 1.8 1.3
M5 0.80 Steel 3.4 2.5
M6 1.00 Steel 6.0 4.4
M8 1.25 Steel 14 11
M10 1.50 Steel 29 21
M12 1.75 Steel 50 37
M14 2.00 Steel 81 60
1/4" 20 Steel S.A.E. 5 12 9.0
3/8" 16 Steel S.A.E. 2 27 20