Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control - Manual (Page 388)

388 Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014
Chapter 5 Component Definition and Maintenance
9. Repeat above steps until you have assigned the desired parameters to all the
traces from Trace1 to Trace16.
10. Now press F9 [TRIGGER] key. The first letter in the second line on the
screen will toggle between C and S. The letter C stands for Continuous
and S stands for Single shot. Select S for single shot.
11. Press F2 [CONDITION] key. The cursor will move to the “=” equal sign.
This defines the trigger condition. Press up or down arrow keys to select +
sign as the trigger condition for our example.
Figure 324 - Trigger Condition
12. Press F3 [DATA] key. The cursor moves to the data field. In our example
we will enter 8 and then press Enter key.
Figure 325 - Data Screen