Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control - Manual (Page 130)

130 Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014
Chapter 3 Operator Interface
Figure 125 - AC O/V Removed From List
Figure 126 - AC O/V Now Enabled
The changes to the fault masks do not take effect until the screen is exited via the
[F10] key, i.e. exiting the FAULTS OVERVIEW will change the masks in the
drive as will exiting the FAULTS SETUP screen. In our example, exiting the
FAULTS OVERVIEW screen and returning to the FAULTS SETUP screen now
shows the “AC O/V” mask as being ON (
Figure 127 ).
Figure 127 - AC O/V Mask is ON