beautypg.com

Drive application review, Rockwell automation drive line-up drawings – Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control User Manual

Page 183

background image

Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014

183

Commissioning

Chapter 4

Drive Application Review

In order to ensure trouble free commissioning, it is necessary for all involved in
the start-up to familiarize themselves with the drive line-up and application.
Service on the equipment should not be performed without a clear
understanding of how the equipment has been designed to function and how the
equipment has been applied. If questions arise that have not been addressed
within this manual, they can be addressed by contacting your local GMS office or
by contacting Medium Voltage Support directly.

Rockwell Automation Drive Line-up Drawings

Prior to performing any service work on the drive line-up, the electrical and
dimensional drawings provided with the equipment must be studied and
understood. Within these drawings is detailed information and instructions
required for commissioning and installation of the equipment including the
following:

Dimensional Drawings

Power cable termination locations

Ground bus locations

Shipping split locations

Control and medium voltage power ratings

Drive options

Remote I/O protocol

PLC options

Motor and load specifications

Drive power component selection ratings

Heat exchanger ratings, connections

Electrical Drawings

Contactor locations (electrically)

Drive topology

General notes

Cable isolation ratings

Symbol table

Component designations

Customer power and control wiring locations (electrically)

Control and medium voltage power ratings

Fuse ratings and locations (electrically)

Device Designations

Color Designations

Wire No. Designations

SGCT Designations

Ribbon Cable Designations

Location of Relay and
Contactor Contacts

Location of Relays

Drawing Location
References