beautypg.com

Piping, tubing and connectors, Non-return valves, Piping, tubing and connectors non-return valves – Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control User Manual

Page 333

background image

Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014

333

Component Definition and Maintenance

Chapter 5

Piping, Tubing and Connectors

The piping is schedule 80 made from chlorinated polyvinyl chloride (CPVC)
which has good high and low temperature properties and is unaffected by de-
ionized water or ethylene glycol. The main piping is either 1.5 inch (38 mm) or
2.0 inch (50 mm) diameter.

The coolant hose connecting chill blocks to manifolds and Common Mode
Chokes or DC Links to piping is made of 10 mm (3/8") EPDM. The hose is
pushed onto hose barbs of stainless steel or CPVC. Hose clamps are used at the
hose barbs.

Non-Return Valves

The non-return valves (NV1 & NV2) shown in

Figure 278

are ball-type valves

made from CPVC. These can not be changed with the drive on-line. All coolant
must be drained to replace these parts.

Figure 278 - Pressure Indicator and Switch Locations

Pressure Indicator PI

NV2

V12

From P2

From P1

V11

NV1

Pressure Switch PS