Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control - Manual (Page 3)

Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014 3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information This table summarizes the changes made to this revision.
Topic Page
Changed all references of “tachometer” to “encoder” Throughout
Added HPTC information to Topology section 17
Updated Speed Regulator Bandwidth 24
Updated Torque Regulator Bandwidth 24
Inserted Torque Accuracy with HPTC 24
Added Polish to list of available Languages 25
Added “Dual-port Ethernet/IP” to Communications Protocols 25
Replaced Control Overview block diagram 29
Added “Pipe Materials and Layout” section 76
Added dimensions and torque information to Pipe Flange detail images 77
Inserted “External Piping to the Drive” section 77
Inserted “Controlled Siphon into Open-top Reservoir” section 78
Added Converter Cabinet Components (3300/4160V) image 212
Added Converter Cabinet Components (6600V) image 213
Changed graphic labels for valve locations 217
Changed graphic labels for valve locations 218
Inserted “System Fill and Air Venting” and “Normal Operation” section 218
Replaced Cooling System Overview chart 328
Inserted “Pump Cabinet with Ebara Pumps” image 331
Added “Pump Replacement with Drive Running” section 331
Replaced Pressure Indicator and Switch Locations image 333
Replaced Temperature and Conductivity Sensors image 337
Replaced Deionizer Reservoir Circuit image 338
Inserted “Replacing the Mesh Filters” section 339
Replaced Catalog Number Explanation 411
Updated “When is an Encoder Required?” section and table 414
Replaced Encoder Selection table 415
Added HPTC information to Drive Torque Capabilities table 415
Updated Typical Application Load Torque Profiles 416