Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control - Manual (Page 395)

Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014 395
Component Definition and Maintenance Chapter 5
Uploading the Data from the drive
Now that you have created an empty notepad file and setup HyperTerminal
connection, you are ready to upload the data from the drive.
1. Connect a null-modem cable between your computer’s serial port and the
serial port ‘J11’ on the Analog Control Board (ACB).
2. Restart HyperTerminal program. On the ‘Connection Description’
window click Cancel.
Figure 338 - Connection Description - New Connection
3. From the File menu, click Open….At the Open dialog box, locate the
HyperTerminal connection you just created in step 2, (e.g. Parameters) and
click Open.
Figure 339 - Open Parameters file