Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control - Manual (Page 160)

160 Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014
Chapter 3 Operator Interface
Figure 171 -
Mixed Format Displayed
Pressing the [F7] key changes the format of the displayed data. When data is
shown as a mixture, a particular value is displayed based on the priority defined
above, (control characters is highest).
The RX row displays data received by the operator interface. The TX row
displays the data transmitted by the operator interface.
Print Screen
The print screen operation allows a screen dump of the operator interface's
display. This requires the use of a second RS232 port communicating at 9600
Baud to an external computer. Special software is required in the computer to
receive the data and to interpret the data.
The operation is initiated from any screen by pressing the [F10] key and the
[cursor right] key at the same time. The screen will clear and a message will
indicate that the screen is being printed as well as the percentage completed.
When complete, the original screen will return.
Memory Dump
The memory dump allows any directly accessible memory (i.e. memory which is
directly addressable and does not require access through a port) to be monitored.
It is called from any screen (except the PRINTER screen), by pressing the [F10]
key and the [cursor left] key at the same time.