Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control - Manual (Page 112)

112 Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014
Chapter 3 Operator Interface
Using the cursor keys, select (i.e. reverse video) the letter with which the desired
tag starts with. The [cursor up] and [cursor down] keys move vertically within a
column, the [cursor left] and [cursor right] key move laterally within the rows.
When the appropriate letter has been selected, press the [enter] key.
All tags which begin with that letter, and are appropriate for the operation on
which the selection is being performed, will be displayed as in
Figure 97 . Using
the [cursor up] or [cursor down] keys, and if required the [F8] and [F9] keys to
change the page, select the desired tag. Press the [enter] key and the selected tag
will be used to continue the operation for which the selection process was being
used.
From either of these two screens (SELECT LETTER or SELECT LIST) you
can return directly to the default selection method via groups by pressing the [F7]
key.
Figure 96 - Selecting via a Letter (Step 1)
Figure 97 - Selecting Name via List (Step 2)
From the SELECT LETTER screen ( Figure 96 ) the tag may also be selected via a
code by pressing the [F5] key.