CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 651)

Useful Utilities
633
11
„ View Actual Stream: Watch the camera view received by Mobile Server. If the camera
resolution is larger than D1, D1 resolution will be applied. If the camera resolution is lower
than D1, the maximum resolution will be applied.
„ View Encode Stream 1: Watch the camera view according to the settings you specify in step
3 for stream 1.
„ View Encode Stream 2: Watch the camera view according to the settings you specify in step
3 for stream 2.
11.19.5 Setting Matrix Channels
To display multiple camera views on a single channel, add up to 32 cameras to a matrix. Up to 4
matrixes can be created. When the matrix channel is being transmitted to a client, two streams are
available to choose from. You can set up different settings for stream 1 and stream 2, such as frame
rate, codec and resolution. The maximum resolution supported is 1.3 M.
To set up matrix:
1. In the left menu, click a matrix channel. This window appears.
Figure 11-108
2. Complete the settings for Stream 1 of the matrix channel. When a client connects to stream 1 of
the matrix channel, the settings will be applied to the transmitted matrix view. Refer to Setting Up
Individual Cameras section above for details.