CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 35)

Configuring Main System
17
1
1.2.3 Adjusting Camera Configuration
In the Camera Configure dialog box, you can adjust the configurations for each camera. Click the
Configure button (No.14, Figure 1-2), select System Configure, and click Camera Configure to
access the following dialog box.
Figure 1-8 Camera Settings
[Camera Name] The name entered here will appear in the upper-left hand corner of the camera
screen. You can use the drop-down list to select the camera to be configured.
[Rec Control] The Rec Control section allows you to set each camera’s recording mode and frame
rate. For analog cameras, you can also adjust the recording quality and codec here.
Figure 1-9