CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 347)

Point-of-Sale (POS) Application
329
7
7.2 Graphic-Mode POS Device
You can integrate a graphic-mode POS device to the GV-System. The transaction data is directly
transferred to the GV-System via a RS-232 serial cable or TCP/IP connection.
Before You Start
Before you start, note the specifications below for the integration:
• This integration only supports the Windows-based POS device.
• An appropriate dongle is required for the integration to work.
• For serial port connection, up to 4 POS devices can be connected to one GV-System. For TCP/IP
connection, up to 16 POS devices can be connected to one GV-System.
7.2.1 Serial Port Connection
To attach the graphic-mode POS device, with the Windows operating system and serial output, to
GV-System, follow these steps:
1. Connect the POS device as illustrated below.
GV-System + USB dongle POS Device
Cross-over RS232
Figure 7-8
2. Insert the Surveillance System Software DVD to the POS device. It runs automatically, and a
window appears.
3. Click Install V 8.5.0.0 System.
4. Select Software POS Driver (Only for Graphic mode POS System), and follow on-screen
instructions to complete the installation.